MD600 4G LTE

MD600 4G AI MDVR

  • 1080p video recording

  • Blind spot detection

  • GPS & MDVR dual system

  • FOTA support

  • Advanced driver assistance system

  • Wifi & BLE

  • Medium – Large Pets & Animals

  • Driver monitoring system

  • RS232, RS484 & CAN Bus

  • 6-axis acceleration sensor

Features

  • Long Lasting battery
  • 8 Polygon Geo-Fences
  • Man Down Alarm
  • GPS Logging
  • USB Micro connector
  • Water Resistant
  • Listen In
  • S.O.S. Button
  • Two way audio
  • Easy to use
  • Information reports
  • Alerts via text / GPRS

Specifications

Rated voltage DC: 11.4V ~ 36V，Rated 12V/3A
Power consumption Startup power consumption for the host with audio and video: about 6W
Daytime: about 24W with 6-way cameras, and about 29W with a display added;
Nightime: about 32W with 6-way cameras, and about 37W with a display added;
When connected to a single camera, the normal range is 50mA~100mA during the day,
and 200mA~250mA at night.
AI video ADAS, DMS
SD card & SSD 1*M2 SSD and 2*SD cards; capacity: 2TB + 2*512GB; supports PCIe*2 and PCIe*4 NVME
Protocol M.2 NGFF SSD (2280 specifications)
System operation Dual-system operation, dual-channel communication (to prevent data loss)
Video input 6 channels for AHD cameras with D1/720P/1080P cameras arbitrary mixing;
Adaptive camera resolution and format (PAL and NTSC);
Up to 6*1080P@15fps live recording
Video output 1 channel for VGA video output (8-Pin aviation plug), max. 1080P, adapt to the display resolution
1 channel for CVBS aviation plug (level: 1.0Vp-p, impedance: 75Ω);
Resolution: PAL 704*576, NTSC 704*480
Compression standard H.264/H.265 configurable
Image display Support 1 or 6 images display
Audio input 6 channels for camera MIC input. The camera should support audio.
1 channel for intercom handle input;
1 channel for 3.5mm headset input (GSM communication interface)
Audio output 1 channel for independent audio output (parallelly connected to the AV-OUT interface,
VGA aviation plug interface and intercom handle interface)
1 channel for 3.5mm headset output (GSM communication interface)
Audio compression G.726/G.711a/AAC
Video Request and Playback Retrievable playback by channel, video type, bitstream type and time
Recording method Normal recording and alarm recording; audio and video recorded simultaneously
Wifi IEEE 802.11 b/g/n, frequency 2.4G & 5G, supports STA and AP dual mode
Bluetooth Supports master-slave dual mode, can read the Bluetooth accessories, and can configure parameters through the APP
Positioning mode GPS/GPS_BEIDOU/GPS_GLONASS
Positional accuracy 2.5 meters
Sensitivity -162 dBm
GNSS antenna Supports antenna insertion/extraction/short circuit detection
Protocol supported JT/T 1078-2016, JT/T808-2019
Meitrack protocol (CCE) and RTMP (an Audio/Video Transport Protocol,
also compatible with the Meitrack Audio/Video Private Transport Protocol)
SPI memory Built-in 64Mbit for storing GPRS/SMS/GPS LOG data
Working temperature -20°C to 70°C (without battery)
Sensors 6-axis acceleration sensor
I/O port Main cable interfaces: 8*Din (Max 8*Din) + 2*Dout(Max 8*Dout) + 2*AD(Max 6*AD)
+ 1*Speed_IN + 1*1-wire + 2*RS485 +1*CAN + 1*DC_5V + 1*DC_12V
Other interfaces: 2-channel for RS232, 1-channel for ACC
RS232 (optional) Thai DLT certification
Dimensions 120 x 154 x 63 mm
Weight 740g (excluding accessories)
MD600-E GSM: B3/B8
WCDMA: B1/B5/B8
LTE-FDD: B1/B3/B5/B7/B8/B20/B28
LTE-TDD: B38/B40/B41
MD600-A WCDMA: B2/B4/B5
LTE-FDD: B2/4/5/12/13/14/66/71
MD600-AU GSM: B2/B3/B5/B8
WCDMA: B1/B2/B4/B5/B8
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66
LTE-TDD: B40
MD600-J WCDMA: B1/B6/B8/B19
LTE-FDD: B1/B3/B8/B18/B19/B26
LTE-TDD: B41
MD600-G GSM: B2/B3/B5/B8
WCDMA: B1/B2/B4/B5/B6/B8/B19
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28
LTE-TDD: B38/B39/B40/B41

Accessories

  • Power & ACC cable
  • I/O cable
  • USB configuration cable
  • GPS antenna
  • Wifi antenna
  • 4G antenna
  • Bluetooth antenna
  • Lock key
  • M.2 screw
  • CD download card

Optional Accessories

  • ADAS camera
  • DMS camera
  • AHD720/1080p small metal conch camera
  • Waterproof square camera 720/1080p
  • Waterproof square camera ACA503
  • Side mounted waterproof camera 720/1080p
  • Hoist waterproof camera 1080p
  • 3/5/8/10/15M extension cord
  • Intercom handle
  • 7-inch VGA display
  • 7-inch CVBS display
  • Bluetooth temperature and humidity sensor
  • Bluetooth beacon AB401
  • Bluetooth beacon AB402
  • Fuel sensor (voltage AD)
  • Capacitive oil sensor (voltage AD)
  • 12V/24V relays
  • iButton card reader
  • Ultrasonic fuel sensor ASUF103
  • Ultrasonic fuel sensor ASUF104
  • Ultrasonic fuel sensor ASUF105
  • Ultrasonic Wifi serial port debugging tool ASUF106
  • Microphone + speaker + connector cable
  • RFID reader +ID card
  • Hight temperature batteries
  • Digital temperature sensor A52
  • Memory card
  • M.2 hard drive

Certificates

image of CE Certificate for GPS Tracker

Frequently Asked Questions

When picking a long lasting GPS tracker, think about its battery life, different tracking settings, how accurate it is, and how tough it is. Find trackers that are strong, waterproof, and have magnetic mounts so they are easy to put in place and can handle tough conditions. For instance, the TA255 from MeitrackUSA.com has a waterproof case and magnetic mount, making it good for many situations. Also, check its alert features and if it connects using 4G with 3G/2G as a backup. This will make sure you can always keep an eye on your assets.

How often you update your tracker’s location greatly affects its battery life. If it updates every few seconds, the battery drains much faster because it is constantly using GPS and sending data. But if it updates less often, like once a day, the battery can last for months or even years. Many trackers, including those from MeitrackUSA.com, have different settings. This lets you choose between tracking things in real-time and making the battery last longer. To get the most out of your tracker’s battery, you need to find the right balance for how often it updates its location.

Long-lasting GPS trackers are often made to work well in tough outdoor conditions. For example, the TA255 solar-powered GPS Tracker from MeitrackUSA.com has a strong, weatherproof case. This allows it to handle very hot or cold weather, humidity, and being outside. This makes it great for tracking metal containers that move through different weather and places. Similarly, other asset GPS Tracker are made for heavy equipment and construction sites. They have weatherproof cases and can work for years. These designs mean you can track your items reliably no matter how challenging the environment is.

To track assets well, certain features are really helpful. These include magnetic mounts for easy, hidden attachment and strong, tough designs that last in bad weather. For example, the TA255 from MeitrackUSA.com has both a magnetic system for simple setup and a weather-resistant case to guard against harsh temperatures and elements. Also useful are location systems with multiple technologies for better accuracy, motion sensors for instant alerts, geofencing to set safe areas, and tamper detection to stop theft. Together, these features make asset protection thorough and dependable.

Long-lasting GPS trackers use different communication technologies. Each choice affects battery life and coverage. Cellular options like 4G LTE-M and NB-IoT are widely used. They provide good coverage and save battery, especially for items that stay put and do not need frequent updates. LoRa (Long Range) technology uses very little power and can reach long distances. This makes it good for country areas or remote spots where cell service is limited. Satellite communication works everywhere. This is essential for tracking things in very far-off places without cell service, but it usually uses more power. The technology picked affects how quickly data is sent, how far it can reach, and how long the battery lasts for devices from companies like Meitrack. Choosing the right technology depends on where the item is, how much it moves, and how often updates are needed.